Make the most of every pass. |
The Seed Terminator for CLAAS
Join the tribe of CLAAS owners making the most of every pass with mechanical weed control at harvest. With 5 times less survivors than its nearest competitor, a history of continous improvement and a range of mill techs available to suit your harvest conditions, this future proof platform is hard to beat.
Magnet Tray for Catching SteelOur patented Magnet Tray comes
as standard because we know rocks aren’t the issue, steel is. |
AeroIMPACT Mill TechOur AeroIMPACT 3 Multistage Hammer Mill screens are 60% thicker and made from specially sourced Australian Steel. With quick changeover of 10 minutes to replace screens, uptime is always at the forefront of our R&D.
|
Commitment to farmersIt is our commitment to have a solution for as many farmers as possible; its what drove the creation of the first mechanical drive in 2016, the development of the CLAAS solution and the continued improvement of the Seed Terminator system.
|
SPECIFICATIONS
Fits to CLAAS 780*, 770*, 760* & 1000 series combines
We fit to Lexion 7600, 7700, 8700 & 8800. For the 700* series 760, 770, 780, fit up is engine dependent (eg CAT C13, Mercedes OM473LA, OM502LA & Perkins 2206). Speak with our specialists to confirm we fit to your combine harvester: Keagan Grant +61 459 701 633 or Brett Asphar M +61 427 213 389
Can the CLAAS seed terminator run on 3m centres?
Yes!
What is included?
The Seed Terminator includes
- Mechanical Drive
- Chassis
- Latest AeroIMPACT mill tech
- Magnet tray
- In cab monitoring system.
FITUP
Installation timing on average takes a total of 20 man-hours or one 12 hours for two people.
Narrow body combines need to have their axle width increased.
Thousand Series: premium plus or comfort plus two speed chopper drives are required. Single speed chopper drives must be upgraded by CLAAS.
Narrow body combines need to have their axle width increased.
Thousand Series: premium plus or comfort plus two speed chopper drives are required. Single speed chopper drives must be upgraded by CLAAS.
modifications
- Narrow body combines need to have their axle width increased
- Thousand Series: replacement chopper drive pulley, replacement chopper pulley. Premium plus or comfort plus two speed chopper drives are required. Single speed chopper drives must be upgraded by CLAAS.
- 700 series: restricted windrowing capability, modifications to sheet metal for upgraded chopper drive, modifications to sheet metal for Seed Terminator drive, reduced ground clearance on folding tailboard variants, replacement jackshaft, high chopper speed only.
Warranty
The Seed Terminator comes with our 2 year driveline warranty and a 12 month warranty period covering all components other than wear items so there's nothing holding you back. From the Original Equipment Manufacturer (OEM) the Seed Terminator is looked at as an attachment and the warranty will not be affected by the installation of the Seed Terminator.
|
|
SPEAK WITH A SPECIALIST
Brett Asphar
|
Mark Bastian
|
Ned Jeffery
|
Keagan Grant
|