Make the most of every pass,
The Seed Terminator for John Deere
Join the tribe of John Deere owners making the most of every pass with mechanical weed control at harvest. With 5 times less survivors than its nearest competitor, a history of continous improvement and a range of mill techs available to suit your harvest conditions, this future proof platform is hard to beat.
|
|
Magnet Tray for Catching SteelOur patented Magnet Tray comes
as standard because we know rocks aren’t the issue, steel is. |
AeroIMPACT Mill TechOur AeroIMPACT 3 Multistage Hammer Mill screens are 60% thicker and made from specially sourced Australian Steel. With quick changeover of 20 minutes to replace screens, uptime is always at the forefront of our R&D.
|
Quick BypassA 2 minute bypass for grain-loss checks that doesn't affect airflow, giving you the confidence to minimise losses.
|
Australian Innovation & Manufacturing at its best.We are a proud South Australian company, the Seed Terminator was developed, tested, manufactured and shipped from right here.
|
|
Specifications
Fits to John Deere S-Series S670*, S680, S690, S770*, S780, S790 + Deluxe, Intermediate & Premium Residue Package
*All S670 & S770 models will require for the main drive pulley on the main engine gearcase to be replaced with CE20125.
Can the seed terminator run on 3m centres?
Yes the Seed Terminator is CTF compatible and can run on 3m centres with most tyre packages.
What is included?
The Seed Terminator includes
- Proven Mechanical Drive
- Chassis
- Latest AeroIMPACT mill tech
- Magnet tray
- Improved Separator
- Turn on Turn off feature
- In cab monitoring system
FITUP
Installation timing on average takes a total of 16 man-hours or one 8 hour day for two people.
The fastest install time on a John Deere was 5 hours 20 minutes.
All machines will require 4 holes to be drilled through the rear hitch plate for mounting of the Seed Terminator, magnetic drill templates can be purchased to mount the drill for ease of locating. We recommend and use a Mag Dill to penetrate the 18mm hitch.
All S670 & S770 models will require for the main drive pulley on the main engine gearcase to be replaced with CE20125.
The fastest install time on a John Deere was 5 hours 20 minutes.
All machines will require 4 holes to be drilled through the rear hitch plate for mounting of the Seed Terminator, magnetic drill templates can be purchased to mount the drill for ease of locating. We recommend and use a Mag Dill to penetrate the 18mm hitch.
All S670 & S770 models will require for the main drive pulley on the main engine gearcase to be replaced with CE20125.
modifications
Combine Harvester will require 4 holes to be drilled through the rear hitch plate for mounting of the Seed Terminator, magnetic drill templates can be purchased to mount the drill for ease of locating.
All S670 & S770 models will require for the main drive pulley on the main engine gearcase to be replaced with CE20125.
All equipped with the intermediate residue package (100 knife chopper) the main drive pulley (HXE12052) on the chopper jackshaft with HXE117754 and drive belt (H240974) with (HXE124869).
All S670 & S770 models will require for the main drive pulley on the main engine gearcase to be replaced with CE20125.
All equipped with the intermediate residue package (100 knife chopper) the main drive pulley (HXE12052) on the chopper jackshaft with HXE117754 and drive belt (H240974) with (HXE124869).
Warranty
The Seed Terminator comes with our 2 year driveline warranty and a 12 month warranty period covering all components other than wear items so there's nothing holding you back. From the Original Equipment Manufacturer (OEM) the Seed Terminator is looked at as an attachment and the warranty will not be affected by the installation of the Seed Terminator.
What do farmers say about their Terminator?
|
Mick Schutz, Grass Patch, WA
|
ST Quads + Triplets Esperance WA
|
Tom Brown, Beaumont WA
|
SPEAK WITH A PRODUCT SPECIALIST
Brett Asphar
|
Mark Bastian
|
Ned Jeffery
|
Keagan Grant
|
Stable operation with reduced vibrationIndividually balanced mills running horizontally ensures stable operation (no gyroscopic forces at play because of horizontal orientation).
|
Efficient by designOur custom designed German manufactured spiral bevel gearbox runs at a low 1580 RPM and doesn't require complicated cooling systems.
|
Shock load protectionWe've designed protection in with independent mills, gearbox and chassis linked by belt drive to isolate and protect your investment.
|