01
Designed to kill enemy #1 - Annual Ryegrass
The latest in performance and efficiency built on the science of mechanically killing weeds.
02
Compact with exceptional clearance
Designed to be simple, robust and compact, this new platform delivers.
03
High capacity AeroIMPACT 4
Keep up with the harvesting power of the CR11, with out highest performing mills.
04
Terminated chaff directed into Optispread system
The CR11 features a completely new residue management system that easily spreads upto 60 foot.
INTRODUCING AEROIMPACT 4
100% PERFORMANCE
By tightening the tolerance between screen and rotor we’ve perfected each phase of termination, increasing capacity while maintaining >97% kill.
LONG WEARING
We’ve taken the next step to 10mm thick Australian Made Bisalloy steel for longer lasting screen tech that goes the distance.
AEROIMPACT 4 VS AEROIMPACT 3
CAPACITY IS KING
Increasing the speed of the mills to 3200RPM allows them to perform with a high volume of throughput. With upwards of 8 B-Doubles of chaff going through an hour in an average wheat crop, we know capacity is king.
100% PERFORMANCE
By tightening the tolerance between screen and rotor we’ve perfected each phase of termination, increasing capacity while maintaining kill
Side drive
optimised.
Terminated chaff directed into Optispread
The CR11 features a completely new residue management system that easily spreads upto 60 foot. Directing the terminated chaff into the headers residue management system ensures chaff is spread full width and incorporated with the straw mat for reduced dust.
Less belts, more drive.
A single 3-groove serpentine belt drives both mills with strength for the toughest of conditions. High end EPDM belt technology delivers superior performance, while protecting the harvester.
The Pro 11 has been designed for optimal pulley geometry underneath. This configuration ensures efficient belt wrapping for max performance.
Engineering for a world that never goes hungry.
Discover the future of sustainable farming with the new Seed Terminator Pro 11.
Limited Release for Australian Harvest 2025, now available for New Holland CR 10 & 11 machines.
She's a beast.
THE NON-CHEMICAL SOLUTION
Compatible with CR 10 and CR11.
Simple side drive, with simple install for minimal impact on the harvester.
Compact system with exceptional clearance.
Lightweight stainless chutes for easy one person removal.
Initially the unit may need to be dropped off the combine to access the mills. 5 bolts to replace screens ~10 minutes. Rotor and flails add ~60 minutes. Fully balanced from factory for plug and play.
Sixth generation gearbox, sped up for less torque.
Running our proven gearbox at higher speeds reduces the torque on drive components for improved efficiency. It’s cooled by three heat sinks and airflow from the outlet. Mounted on an aluminium block for added heat dissipation.
12 month driveline warranty and 12 month warranty covering all components other than wear items.
- Latest release F1 Monitoring System.
- New simple bypass.
- Vibration alarm for early wear detection.
- External Gearbox temperature monitoring.
- Left and right mill speed sensors.
- Magnet tray as standard.
Chat to our team about CR10-11
Considering going big next harvest? Speak with our team to get your intel directly from the source.