THE NON-CHEMICAL SOLUTION
The next generation of Origin
The MY25 Origin with SmoothFeed 2 brings a new level of performance to New Holland CR combines.
20MIN
CHANGE OVERS
99%
KILL RATE
1/7
Serpentine drive for up to 50% more power*
The new Serpentine Drive system is designed for increased power transmission—leveraging lessons from the Pro platform to bring the Origin for New Holland to the next level.
Plus speed up to 3050 RPM for max capacity
*50% more power transfer compared to the MY24 Origin for New Holland belt drive.
2/7
SmoothFEED 2
Our latest design features lightweight stainless steel chutes, designed to be easy to manoeuvre, allow for excellent material flow and durable for tough harvest conditions.
3/7
Going Pro with AeroIMPACT 4
The latest in performance and efficiency built on the science of mechanically killing weeds. 2023 stationary efficacy tests show high levels of control > 97% against Australian Annual Ryegrass Lolium Rigidum.
10 minute change over: Our latest screen design is even faster to change out in 10 minutes. You’re welcome.
10mm thick = Long Life: We’ve taken the next step to 10mm thick Australian Made bisalloy steel for longer lasting screen tech that goes the distance. Standard for our Pro platform, this is a first for Origin.
4/7
Capacity is king
By tightening the tolerance between screen and rotor we’ve perfected each phase of termination, increasing capacity while maintaining kill.
Increasing the speed of the rotors to 3050RPM allows them to perform with a high volume of throughput. With upwards of 8 B-Doubles of chaff going through an hour in an average wheat crop, we know capacity is king.
Combine this with aerodynamic rotor bars to reduce turbulence (aka wasted energy), this is the most efficient mill on the market.
5/7
Scrapers for the win in green
External scraper system on the AeroIMPACT 4 Rotors reduces buildup and enhances green material handling.
SmartALARM accurate monitoring
We've tapped into the combine engine RPM so we can up the accuracy of our mill speed alarms. Now we only alert operators when there is genuine belt slip, not just the engine RPM dropping.
6/7
Eat stones for breakfast
The flexible flails in our system are meticulously balanced and fitted into a precision-engineered spindle, ensuring flawless operation at 3050 RPM. This design crushes, shears, grinds, and impacts weed seeds against screens with remarkable efficiency.
Rocks? We've not had a single rock damage our mills in over 9 years of operation.
7/7
Next level performance
More capacity. Less compromise.
This is the future of harvest weed seed control—and it’s available now.
The Dynamic Straw Streamliner or DSS ensures complete separation of straw and chaff to minimise MOG being processed by the Seed Terminator resulting in fuel savings, reduction in engine load and improved residue system handling.
Featuring an extended draper belt in the back of the New Holland harvester to assist in carrying all residue from the discharge beater to the chopper.
Driven by the hydraulic motor used to drive the PSD (for Opti-Spread machines) or driven by the infeed roller for standard. The DSS fits to all Seed Terminators on New Holland CR models with the OEM Standard residue systems (standard or Opti-Spread), it is not compatible with aftermarket options.
The new SmartAlarm technology tethers the Terminator operating speed to the combine, removing any alarms due to drops in the engine.
Less belts, more drive.
Moving to a single serpentine belt to drive both mills, means superior drive performance
Chopper Home
The Seed Terminator SmoothFEED 2 allows the chopper to operate in
the factory position for improved integration.
Allowing the chopper to resume its factory position improves the straw material flow, for smoother operation.
Leading the way in mechanical weed control, we’re working with New Holland to deliver seamless integration and proven performance at harvest.
The RRP for a Seed Terminator is $139,000 AUD ex GST, ex fitting. For the New Holland Seed Terminators we recommend installing our Dynamic Straw Streamliner (DSS) to ensure full separation of the straw fraction.
The Seed Terminator includes
- Mechanical Drive
- Chassis
- Latest AeroIMPACT mill tech
- Magnet tray
- In cab monitoring system
Deep research & development in this space shows that the energy needed to destroy tiny seeds is high, if you are not using power you are not killing seeds. We estimate it will require 80-100 horsepower.
Yes, we aim for this to be a future proof technology platform, able to slot in the latest mill technology available in two or five years' time.
CR 9090, 8090, 1090, 8.90, 9.90, 10.90
The Seed Terminator simply bolts onto the hitch.
The Seed Terminator comes with our 12 month driveline warranty and a 12 month warranty period covering all components other than wear items so there's nothing holding you back. From the Original Equipment Manufacturer (OEM) the Seed Terminator is looked at as an attachment and the warranty will not be affected by the installation of the Seed Terminator.
The future of weed control
Seed Terminator is on a mission to change agriculture globally.
Dr Nick Berry shares why mechanical weed control is integral to the future of farming and discusses the sustainability of herbicide applications and preservation of the chemicals that allow farmers to produce enough food to feed the world.
Real time monitoring
Our in cab display monitors mill speeds, bearing gearbox temperatures, wear vibration sensors and blockage sensors.
SmartAlarm
Our advanced monitoring system comes with the new SmartAlarm technology tethering the Terminator operating speed to the combine, removing any alarms due to drops in the engine.
Magnet Tray for Metal Objects
Our patented Magnet Tray comes as standard because we know rocks aren't the issue, steel is.
New Holland Origin's operating in
Western Australia
01
Efficient by design
Custom designed German manufactured spiral bevel gearbox that runs at a low 1580RPM without the complication of a cooling system.
02
Upgradeable with easy access
Designed to be easy to live with.
03
Future Proof
New mill technology stays compatible with machines. Plus mill options for tough conditions.
04
Quick, Easy Servicing
Easy-access design allows for quick, plug & play change-outs for upgrades, repairs and maintenance.
SPECIFICATIONS
The Seed Terminator simply bolts onto the hitch.
Sorry, this platform doesn't fit 3m centres, its currently 3.5m. Please note when fitting the drive line to power the Seed Terminator, the rear tyres on New Holland combines need to be moved out to greater than 3.4m, to allow tyre clearance for turning.
The Seed Terminator includes
- Mechanical Drive
- Chassis
- Latest AeroIMPACT 4 mill tech
- Magnet tray
- Lightweight stainless steel chutes
- In cab monitoring system including our latest Smart Alarm technology
Installation timing on average takes a total of 20 man-hours or one 12 hour day for two people
- Seed Terminator will bolt onto the rear hitch plate.
- The PTO output pulley needs to be changed to the pulley provided in the Seed Terminator Kit.
- Drive modifications vary depending on the chopper option selected.
- When fitting the drive line to power the Seed Terminator, the rear tyres on New Holland combines need to be moved out to at least 3.4m, to allow tyre clearance for turning.
The Seed Terminator comes with our 12 month driveline warranty and a 12 month warranty period covering all components other than wear items so there's nothing holding you back. From the Original Equipment Manufacturer (OEM) the Seed Terminator is looked at as an attachment and the warranty will not be affected by the installation of the Seed Terminator.
Chat to a Seed Terminator Farmer
Ever wondered how a Seed Terminator works in real life? Chat with a local farmer and get the inside scoop directly from the source.
